Job Description:

  • Ability to create detailed MEPF Coordination Drawings using AutoCAD
  • Ability to understand various Architectural ,Interior and MEPF drawings to create MEPF coordinated clash free plans, Sections etc.
  • Should have technical knowledge of various aspects of building services including HVAC, Firefighting, Electrical, ELV, Plumbing water supply, and drainage systems.
  • Ability to reroute MEPF services Drawings in order to create clash free routing from co-ordination point of view to freeze false ceiling level
  • Must have the ability to detect and resolve clashes between architectural, structural, mechanical, electrical, plumbing, and firefighting trades.
  • Ability to coordinate according to client requirements and site conditions all (MEP clash-free coordination).
  • Basic knowledge of installation MEPF services for all due co-ordination is required
  • Knowledge of Revit MEP is an added advantage
  • Proficient and expertise in AutoCAD  is must

Job Description:

  • To prepare Engineering Design Briefs
  • To undertake design of MEP Services with the help of Jr. Engineer & Draughtsman
  • To interview & select subordinates & mentor them.
  • To oversee Design development from Concept- Schematic-Tender- Good for Construction- Approve shop Drawings.
  • To oversee co-ordination of MEP Design & Revit Modelling
  • To prepare & oversee BOQ & Budgets
  • Liaison with Consultants & Clients & Contractors
  • Be Responsible for Quality & Accuracy of MEP Design
  • Knowledge of REVIT would be an added advantage.

Job Description:

  • Preparation of Water supply piping with sizing and layouts for toilets, wash basin, scrubs etc.
  • Preparation of building internal drainages piping with sizing and layouts for soil, waste and storm water drainages toilets, wash basin, scrubs etc.
  • Preparation of external drainages with sizing and layouts for soil, waste and storm water drainages.
  • Preparation of Plumbing water supply and drainage water schematic
  • Preparation of Material take off list and measurement sheet for making Plumbing & fire-fighting BOQ
  • Preparation of water UG tank, OHT etc. layout and sleeve layoutPreparation of layouts of firefighting internal & external hydrant and sprinkler system and fire pipe layout and sizing.
  • Preparation of Plumbing pumping, WTP and fire pumps layout and sections as required
  • 9. Knowledge of Revit MEP is an added advantage
  • 10. Proficient and expertise in AutoCAD is must

Job Description:

  • Preparation of Water supply piping with sizing and layouts for toilets, wash basin, scrubs etc.
  • Preparation of building internal drainages piping with sizing and layouts for soil, waste and storm water drainages toilets, wash basin, scrubs etc.
  • Preparation of external drainages with sizing and layouts for soil, waste and storm water drainages.
  • Preparation of Plumbing water supply and drainage water schematic
  • Preparation of Material take off list and measurement sheet for making Plumbing & fire-fighting BOQ
  • Preparation of water UG tank, OHT etc. layout and sleeve layoutPreparation of layouts of firefighting internal & external hydrant and sprinkler system and fire pipe layout and sizing.
  • Preparation of Plumbing pumping, WTP and fire pumps layout and sections as required
  • Knowledge of Revit MEP is an added advantage
  • Proficient and expertise in AutoCAD is must

Job Description:

  • Heat load calculations for AC & Heating
  • Ventilation calculations & Duct sizing
  • Capacity calculations and selection of HVAC Equipment, Chiller, Pumps, AHU, FCU, VRF, Ventilations fans etc.
  • Space planning of AHU, fans , HVAC plant room etc.
  • Piping sizing  (for Chilled water, Hot water, Condenser water, Refrigerant piping ,VRF piping etc.)
  • Preparation of preliminary /conceptual scheme of the mechanical system
  • Certification and approval of all kind of shop drawings submitted by contractors for site issue
  • Required to lead for Site visit / Factory inspection visit /client place visit /weekly meeting etc.
  • Sound knowledge in HVAC ducting designing  with the thorough knowledge of ducting installation standard.
  • Piping design skill especially with chilled water / Dx system along with the thorough knowledge of piping installation standard
  • Able to do prepare chilled water & hot water schematic and detail design
  • Ability to understand and read drawings of Architectural, Structural , interior drawings, MEP drawings.
  • Making of technical specifications, BOQ, data sheet, techno- commercial comparison of equipments and contractors
  • Smoke exhaust, Lift well/Staircase/Lift lobby pressurization calculations etc.
  • Knowledge of Revit MEP & AutoCAD is an added advantage

Qualification : B.Arch/ M.Arch

Special Skills: REVIT, AUTOCAD, PHOTOSHOP,SKETCH UP, PRESENTATION WORK, GOOD FOR CONSTRUCTION DRAWINGS

Job Description

  • Able to conceptualise and do schematic design of Hospitals
  • Manage & Develop Working Drawings (GFCs/ Construction Drawings) and guide team
  • Any other responsibility assigned by Reporting Head

Qualification: B.Arch

Special Skills: REVIT, AUTOCAD, PHOTOSHOP, SKETCH UP, GOOD 3D & PRESENTATION SKILLS

Job Description

  • Able to conceptualise, create work in REVIT
  • Manage Working Drawings once guided
  • Any other responsibility assigned by Reporting Head/ Project Leader

Qualification: CIVIL Draughtsman Course, AUTOCAD, REVIT 2021, REVIT 2023

Special Skills: Knowledge of Good for Construction Drawings, Civil Works,

Job Description

  • Architectural REVIT Design
  • Civil Drawing works
TO APPLY, MAIL YOUR UPDATED CV TO [email protected]

    Fill the application form